龍門式液壓鋼管合縫矯直機

YHJ-100/YHJ-150龍門式液壓鋼管合縫矯直機 Double housing type hydraulic steel pipe scribing straightener model 該機為龍門式五缸壓力機，其上部安裝100噸下壓油缸，兩側各安裝可上下移位的50噸側壓油缸，并由兩只垂直安裝的移位油缸帶動,通過更換和調節加長壓桿，可對φ350-φ1500范圍內的鋼管進行合縫作業。下部工作臺其V形支撐可進行寬度調節，以適應不同直徑鋼管的需求。該機還可利用前后管支架對鋼管進行矯直作業，一機兩用。 This machine is double housing type pressing machine with five cylinders. On the top of it is an underlying oil pressing cylinder with 100 ton,and on both sides of the machine two side-oil pressing cylinders of 50ton which can move up and down are installed. So it can be used in the scribing operation to the steel tubes with all kinds of diameter in the range of φ350～φ1500 by replacing and adjusting the lengthened compressed member. The lower operation board sup-ported with V type can adjust the width in order to meet the requirement o